Quilled Starfish Tutorial

The crazy-warm weather we've enjoyed in Delaware this week has me thinking of summer days, the beach and a quilled jewelry tutorial I've been meaning to post here ever since the paper crafting site Folding Trees closed its doors. This was actually my very first quilling tutorial and was shared there as a guest post, so I'm happy to be able to give it a homecoming of sorts here on ATP. It was the first of many quilled jewelry tutorials I've written since launching the blog... this month is its seventh anniversary!

Quilled Starfish

Tools and Supplies:

Quilling paper - black with gold metallic edge, 1/8 inch (3mm) width, imported from JJ Quilling Design in England and available from most U.S. quilling suppliers. (it has a smooth, beautiful shine along one edge; also available in silver and copper) A package of thirty strips will be enough to make a whole school of fish... well, several at least. [edit: As of 2022, JJ Quilling has been sold, however, Quilled Creations now sells metallic edge strips in various colors.]
Quilling tool
Craft glue - I like to use clear gel glue, such as Scotch Glue
Ruler
Scissors
Tweezers - long ones with a fine tip
Glass head pin
Toothpick - to apply glue
Crimping tool - I use this one by Fiskars
Plastic lid - use as glue palette
Non-stick work board
Damp cloth - to keep fingers glue-free
Flat nose jewelry pliers - you'll need 2
Jump ring
Necklace cording or chain
Optional: I usually don't find it necessary to use a protective coating on paper pendants, but in a hot, humid climate you may want to apply a spray or brush-on matte fixative. Liquitex Matte Varnish is a good one.

All Things Paper is an Amazon affiliate. Additional quilling and paper craft supplies can be found in my Amazon shop.

Instructions:

The starfish arms are called wheat ears in quill-speak. They are made with a simple folding technique. You'll make five wheat ears with six loops each.

step 1

1. Begin a wheat ear by making a ¼ inch fold at one end of a 10 inch (approximate) strip.

step 2 
2. Loop the strip completely around the fold; apply glue at the bottom of the loop to anchor the strip in place. Continue to loop the paper, spacing the loops evenly. It isn't necessary to glue each one.
Each should be slightly larger (taller) than the previous loop. Gently shape the loops as you go to form a column.

Completed quilled wheatear

3. Glue end and trim excess paper.

Gluing tip: When it comes to glue and quilling paper, less is more. I like to put a small dollop of glue on a plastic lid and dip from it with a toothpick or pin - this helps to control the amount.

Fiskars paper crimper with quilling strip 
4. Glue two 14-inch strips, one on top of the other, to create a double thickness. Wipe away any excess glue with a damp cloth while the glue is still wet. When the glue has dried completely, run the strip through a paper crimper. Cut strip into 2½-inch lengths.

5. Apply glue to one side of a crimped length and press it gently in place around a wheat ear. Trim excess. Repeat for each wheat ear.

6. Arrange wheat ears in a star shape and glue them together at center point. Bend tips slightly for a natural look.

Quilled Starfish Necklace

7. Make the center coil: Cut a 4-inch strip of quilling paper in half lengthwise. Insert one end of the strip in quilling tool slot. Turn the tool with one hand while guiding the strip with the other. When the paper is fully wound, apply a bit of glue to the end, press in place, and slide coil off tool.

8. Gently press against underside of the tight coil with the ball of a glass-head pin. Apply a small amount glue inside the dome to preserve the shape, then glue it to the center of the starfish.

9. Reinforce pendant strength: Dot glue on the back at the center join spot. Allow glue to dry completely, preferably overnight.

Opening and Closing a Jump Ring 
10. Attach jump ring: To open jump ring, grasp each side close to the split with pliers and twist gently. Slip ring through the end of one starfish arm and reverse the twisting motion to close.

11. Slide necklace cording or a chain through jump ring. Finis! Something new to wear today.

Quilled Sea Creatures
More sea creature ideas.

Tip: If you don't have access to metallic-edge quilling paper, plain black strips can be edged with a gold leafing pen. Another option is to press the completed quilling against a metallic ink pad, such as Galaxy Gold by Brilliance.

Quilled Paper Pendant

One more thing... Richela Fabian Morgan surprised me earlier in the week when she posted this photo of herself wearing a silver-edge black paper pendant I made for her a few years ago. (You might recall Richela's name from this grocery bag tote bag she designed for the All Things Paper book and her own series of Tape It & Make It duct tape books.) She said she tries not to wear it too often because she's really hard on her jewelry so I told her my all-time favorite paper jewelry tip... Last thing on, first thing off!

Ann Martin
Ann Martin

This is a short biography of the post author and you can replace it with your own biography.

Comments

  1. Very beautiful!
    Thank you for sharing!

    ReplyDelete
  2. Just lovely....and congrats on seven years...WOW...hoping for many more

    ReplyDelete
  3. Thanks Joan, Suzana and cate! I'm glad you like the necklace idea. I'm working on a book of quilled wearable designs so stay tuned for more.

    ReplyDelete
  4. Oh, this is so beautiful! So delicate!

    ReplyDelete

Post a Comment

Thank you for taking the time to leave a comment. I try to respond to questions within 24 hours, so please check back.