Quill a Beautiful Hummingbird: Free Project from "Modern Quilling"!
In case you are having trouble seeing the project tutorial pages, I have typed out the project supplies and steps below. If you are new to quilling, refer to the instructions and photos to make each coil shape.
Crafted in a beautiful blue colour palette, this hummingbird
artwork practically buzzes with personality!
You will need:
Hummingbird template, page 125
Quilling papers, I used 10mm (3/8in)
Quilling tool
Scissors
Tacky PVA glue
Glue brush
Quilling board
Tweezers
Plain card in royal blue and bright yellow for the mount
(optional: mine measures 19 x 15cm/7½ x 6in in blue and 15 x 10.5cm/6 x 4 1/8in
in yellow)
Quilling paper colours
Sapphire (12)
Indigo (13)
Light green (22)
Viridity [grass green] (24)
Lemon (39)
Royal blue (48)
Turquoise (56)
Quilled elements
Triangle
Loose swirl/Open scroll
Tight coil
Loose scroll
Hollow teardrop
Marquise
Head and beak
1. To make the hummingbird’s head, cut a 30cm (12in) strip in royal blue and follow the loose coil instructions on page 104, using the 15mm (9⁄16in) hole on the quilling board.
Once made, apply a little glue to the base of the coil and stick down to the template.
2. For the beak, cut a 4.6cm (1 13/16in) strip in lemon and fold in half. Using a glue brush,
apply a little glue to the base and stick down, holding in place to allow the glue to bond.
Body and chest
3. The body and chest of the hummingbird are made up of four different elements, the first of which are the loose swirls, one in lemon, and one in royal blue. Cut a 3cm (1 3/16in) in each colour and follow the instructions on page 108 to make the swirls. Add a little glue to the base of both swirls and fix down to the template.
4. At the centre of the body sit three tight coil shapes.Cut a 8cm (3 1/8in) in sapphire, royal blue and turquoise, then follow the instructions on page 100 to make. Apply glue to the base and fix down.
5. Next, make both large and small hollow teardrops; there are two in each size in two different colours. For the large size cut a 6.5cm (2 9/16in) in sapphire and viridity. For the small size cut a 3.5cm (1 3/8in) strip in both lemon and light green, then follow the instructions on page 112 to make. Dab a little glue on the base of each element and fix down to the template.
6. Inside the hollow teardrops are marquise shapes in matching colours. Cut a 30cm (12in) strip in viridity and sapphire, using the 15mm (9/16in) hole on the quilling board and follow the instructions on page 107 to make.
Wings
7. The wings on this magnificent bird are made with five different shades of marquise shapes. Cut one 30cm (12in) strip each in indigo, royal blue, sapphire, turquoise and light green, and make the marquise shapes using the 15mm (9/16) hole on the quilling board.Once all the marquise shapes are made, apply a little glue to the base of each shape and fix down to the template.
8. At the base of the body sits a ring of tight coils in seven different shades: lemon, light green, viridity, turquoise, royal blue, sapphire and indigo. Cut an 8cm (3 1/8in) strip in each color and make the tight coils.
9. Once all elements are made, apply a little glue to the base of each shape and fix down to the template.
Mount and frame
10. To finish this piece cut and mount the artwork onto a base card of your choice and frame. I chose a bright yellow and deep blue shade to complement the shades within.
If you make Jessica's hummingbird, I hope you'll share a photo with me and/or Jessica on Instagram or Facebook... we'd love to see!