Disclosure — In order to maintain this small business, All Things Paper earns revenue via affiliate commission on the sales of linked products from Amazon, Ecogami, and Etsy. Purchasers will not pay more for these items due to the affiliation.
Welcome to Christmas in July, paper stitching-style! Each summer I like to chill down with a small project that has me humming Jingle Bells and reminiscing about Jack Frost's window etchings. This year's adventure is an embroidered tree ornament that can double as a gift topper... but wait, there's a special twist.
I've teamed up with Patty MacGuire of the blog, PattyMac Makes [offline], so you'll have access to two brand new paper stitching projects! Patty's ease of doing many different types of making caught my eye on Instagram where I was drawn in by her fab photography. Pretty soon I tossed out the idea that it would be fun to collaborate on a project.
Patty agreed and we decided to each make a stitched paper star to post as a tutorial. It's safe to say she was a bit unsure at first as she had never done paper stitching, but she found out she loves it! Let Patty show you how to embroider a Christmas Star Card... her design is such a pretty one and even her photo is ethereal.
Stitched Christmas Star Card Tutorial
And now we'll make my Embroidered Star Ornament / Gift Topper
You will need:
Suede paper - 1 sheet, alpine green (regular card stock can be used for both circles; suede paper gives a rich look)
Circle templates - two sizes; I used drinking glasses with rim widths of 2 7/8" (7.3cm) and 3 1/8" (7.9cm)
Printable star pattern - I printed mine to measure 2/1/2" (6.35cm) in diameter
Pencil
Pin -
ball head pins are my fave; sharp, rust-proof, and easy to pick up
Needle - choose one with an eye wide enough to accommodate the cord
Tape
Paint brush - to apply glue
Step 1
Right click and save the star pattern. Print (you may need to modify the width according to your small circle template size) and cut it out along the outermost border. Here is the
wikiclipart page where I found it... note that the designs are designated for personal use only; you may not make multiples to sell. (This
star pattern would be a great one too!)
Step 2
Use a pencil to trace around the small circle templates on the suede paper and do the same with the large circle template on the card stock. Cut slowly - turn the paper, not the scissors - for the smoothest look. If you have a cutting machine, use that instead!
Step 3
Position the star template at the center of the reverse side of the suede paper, hold it in place firmly with your fingers, and use a sharp pin to pierce a hole at the point of each angle. The holes will barely show on the suede surface, but will be clearly visible on the backing. When all of the holes are pierced, put the template aside. (Your needle will enlarge the holes slightly when stitching... there's no need for them to be overly large.) Tip: Place the suede paper on a magazine or old foam place mat before piercing... not your nice tabletop!
Step 4
Thread the needle with a 24-inch (61cm) length of ornament cord... longer than that and it may tangle. Begin stitching on the reverse side at one of the star's outermost points, drawing nearly the full length of cord up through the first hole. Leave about a 1/2-inch (0.5cm) tail and tape it in place without covering any of the holes... there's no need to tie a knot.
Go down through the next closest hole. Continue stitching your way around the star's five points, in and out of the holes, one at a time, to create each angle. When the end of the cord is reached, again leave a short tail and adhere it with a small piece of tape. Thread the needle with another 24-inch length of cord and repeat until the stitching is complete.
Step 5
a. Position the stitched circle on the red circle and use a pin to pierce a hole for the hanging cord in the red circle at the tip of one of the star's points.
b. Use a brush to apply glue smoothly on the reverse side of the stitched circle. Center it on the red circle, positioning the pierced hole at the tip of one of the star's points. Press firmly to adhere the circles. Allow the glue to dry. Tip: You may prefer to use double-stick tape instead of the glue
method. Either way, take care to center the stitched circle to avoid do-overs.
c. Insert a needle threaded with a 10-inch (25.4cm) length of cord into the pierced hole and tie a hanging loop. Trim excess cord.
And voilĂ , all done! I hung it (just for a moment) on the holly bush in my back yard one evening hoping for a realistic Christmas-y evergreen effect. No bright red berries yet... they'll be ready for holiday decorating in late November. There were plenty of green ones though (and mosquitoes too... the things I do for this blog, haha :).